Technical Informationen

Hasberg-Precision Thickness Gauge Strip, Calibrated Shim Foils.

thick- ness mm	thick- ness- tolerance ±mm	12,7 mm wide carbon- steel	12,7 mm wide stainless	6 mm wide carbon- steel	25 mm wide carbon- steel	50 mm wide carbon- steel	100 mm wide stainless	150 mm wide stainless	150 mm wide brass
0,005	0,001	-	1.4301 1700-1900	-	-	-	-	-	-	Material-No. tensile strength N/mm
0,01	0,002	1.1274 2100-2300	1.4301 1700-1900	-	1.4301 1500-1700	1.4301 1500-1700	-	-	-	Material-No. tensile strength N/mm
0,02	0,002	1.1274 2000-2200	1.4301 1700-1900	-	1.4301 1600-1800	1.4301 1600-1800	1.4301 1600-1800	-	-	Werkstoff-Nr. Zugfestigkeit N/mm
0,025	0,002	-	-	-	-	-	-	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,03	0,002	1.1274 2000-2200	1.4301 1700-1900	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,04	0,003	1.1274 2000-2200	1.4301 1700-1900	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,05	0,003	1.1274 2000-2200	1.4301 1700-1900	1.1274 2000-2200	1.1274 2000-2200	1.1274 2000-2200	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,06	0,003	1.1274 2000-2200	-	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,07	0,004	1.1274 2000-2200	-	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,075	0,004	-	-	-	-	-	-	1.4310 1400-1600	2.0321 500-600	Material-No. tensile strength N/mm
0,08	0,004	1.1274 2000-2200	-	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,09	0,004	1.1274 2000-2200	-	-	1.1274 2000-2200	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,10	0,004	1.1274 2000-2200	1.4301 1600-1800	1.1274 2000-2200	1.1274 2000-2200	1.1274 2000-2200	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,12	0,004	1.1274 2000-2200	-	1.1274 2000-2200	-	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,15	0,005	1.1274 2000-2200	1.4301 1600-1800	1.1274 2000-2200	1.1274 2000-2200	1.1274 2000-2200	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,18	0,005	1.1274 2000-2200	-	-	-	1.1274 2000-2200	-	-	-	Material-No. tensile strength N/mm
0,20	0,006	1.1274 1800-2000	1.4301 1600-1800	1.1274 1800-2000	1.1274 1800-2000	1.1274 1800-2000	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,22	0,006	-	-	-	1.1274 1800-2000	-	-	-	-	Material-No. tensile strength N/mm
0,25	0,007	1.1274 1800-2000	1.4301 1300-1600	1.1274 1800-2000	-	1.1274 1800-2000	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,30	0,007	1.1274 1800-2000	1.4301 1300-1600	1.1274 1800-2000	1.1274 1800-2000	1.1274 1800-2000	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,35	0,008	1.1274 1800-2000	-	-	-	1.1274 1800-2000	-	-	-	Material-No. tensile strength N/mm
0,40	0,009	1.1274 1700-1900	1.4301 1300-1600	1.1274 1700-1900	1.1274 1700-1900	1.1274 1700-1900	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,45	0,009	1.1274 1700-1900	-	-	-	1.1274 1700-1900	-	-	-	Material-No. tensile strength N/mm
0,50	0,010	1.1274 1700-1900	1.4301 1300-1600	1.1274 1700-1900	1.1274 1700-1900	1.1274 1700-1900	1.4310 1600-1800	1.4310 1600-1800	2.0321 500-600	Material-No. tensile strength N/mm
0,60	0,010	1.1274 1700-1900	-	-	1.1274 1700-1900	1.1274 1700-1900	1.4310 1600-1800	-	-	Werkstoff-Nr. Zugfestigkeit N/mm
0,70	0,012	1.1274 1500-1700	-	-	1.1274 1500-1700	1.1274 1500-1700	1.4310 1600-1800	-	-	Material-No. tensile strength N/mm
0,80	0,013	1.1274 1500-1700	-	-	1.1274 1500-1700	1.1274 1500-1700	1.4310 1600-1800	-	-	Material-No. tensile strength N/mm
0,90	0,013	1.1274 1500-1700	-	-	1.1274 1500-1700	1.1274 1500-1700	1.4310 1600-1800	-	-	Material-No. tensile strength N/mm
1,00	0,017	1.1274 1500-1700	-	-	1.1274 1500-1700	1.1274 1500-1700	1.4310 1600-1800	-	-	Material-No. tensile strength N/mm
1,10-1,50	0,025	-	-	-	-	-	1.4310 1400-1500	-	-	Material-No. tensile strength N/mm
1,60-2,00	0,050	-	-	-	-	-	1.4310 1200-1400	-	-	Material-No. tensile strength N/mm

conversion tensile strength / Rockwell hardness
N/mm	HRC
2100-2300	56,8-60,1
2000-2200	55,3-58,5
1800-2000	52,1-55,3
1700-1900	50,5-53,8
1600-1800	48,5-52,1
1500-1700	46,5-50,5
1400-1600	44,3-48,5
1200-1400	38,0-44,3

Material 1.1274
Carbonsteel	Chemical Analysis:
CK 101	C = 0,95 - 1,05%
US-Norm AISI 1095	Si = 0,10 - 0,30%
AFNOR NF A 35-553	Mn = 0,30 - 0,50%
cold-rolled, hardened	P = max. 0,02%
clean surface	S = max. 0,03%

Material 1.4301
stainless and acid-resisting steel	Chemical Analysis:
X 5 Cr Ni 18 9	C = max. 0,07%	Cr = 17 - 20,0%
US-Norm AISI 304	Si = max 1,00%	Ni = 8,5 - 10,0%
AFNOR Z 6 CN 18-09	Mn = max. 2,00%
cold-rolled, spring-grade hardness	P = max. 0,045%
clean surface	S = max. 0,03%

Material 1.4310
tainless and acid-resisting steel	Chemical Analysis:
X 12 Cr Ni 17 7	C = max. 0,12%	Cr = 16 - 18,0%
US-Norm AISI 301	Si = max 1,00%	Ni = 7,0 - 9,0%
AFNOR Z 12 CN 17-08	Mn = max. 2,00%
cold-rolled, spring-grade hardness	P = max. 0,045%
clean surface	S = max. 0,03%

Material 2.0321
brass	Chemical Analysis:
CuZn 37	Cu = 62,0 - 64%
US-Norm C 27400	Pb = max 0,10%
AFNOR U-Z 36 CuZn 36	Zn = Rest
cold-rolled, spring-grade hardness, clean surface

Edges:

Thicknesses 0,005 - 0,02 mm an all widths 100 and 150 mm of stainless steel and brass: low-edge cut

all other dimensions: deburred or round off

furhter technical details on demand

Thickness tolerances T3

valid for all custom and standard widths, carbon steel, stainless steel and brass.

Thickness
mm

0,005

0,01 to 0,03

0,04 to 0,06

0,07 to 0,12

0,15 and 0,18

0,20 and 0,22

0,25 and 0,30

0,35

0,40 and 0,45

0,50 and 0,60

0,70

0,80 to 1,00

1,10 to 1,50

1,60 to 2,00

Thickness-
tolerances
mm

±0,001

±0,002

±0,003

±0,004

±0,005

±0,006

±0,007

±0,008

±0,009

±0,010

±0,012

±0,013

±0,020

±0,035

Hasberg-Schneider GmbH

Rudolf-Stratz-Straße 1
83233 Bernau

Tel. 0 80 51 / 8 90 97
Fax 0 80 51 / 8 92 58

info(at)hasberg-schneider.de