|
|
Here you will find a table listing the special dimensions for our custom precision gauge tape and reference sheets – which can be made according to your requirements – and are colour-coded according to deliverable materials (stainless steel, brass foil, carbon steel):
from width 1 to 150 mm max.
in thickness from 0.03 – 0.50 mm max.
Please note the max. deliverable strip length is 1000 mm.
Here you will find a few examples of applications of our carbon steel, stainless steel and brass foil products.
Material | Thickness mm | Width mm | Length up to mm |
|---|
Stainless Steel
W.-St.Nr.1.4301
resp. 1.4310,
spring grade hardness | 0,05 / 0,075
0,10 / 0,15
0,20 / 0,25
0,30 / 0,40
0,50 | 1 to 150 | upto 1000 | Brass foil
CuZn37,
hard-rolled | 0,05 / 0,075
0,10 / 0,15
0,20 / 0,25
0,30 / 0,40
0,50 | 1 to 150 | up to 1000 | Carbonsteel
Ck 101,
W. St. Nr. 1.1274,
hardened | 0,03 / 0,04
0,05 / 0,06
0,07 / 0,08
0,09 / 0,10
0,12 / 0,15
0,18 / 0,20
0,25 / 0,30
0,35 / 0,40
0,45 / 0,50 | 1 to 50 | up to 1000 |
Custom sizes up to 1000 mm length,
perforated, with rounded ends, incl. colour markings
Blanks all thicknesses 0,03 - 0,50 mm (according tabel Standard Dimensions),
also applies to small quantities, short-notice, low tool costs.
Some Applications
Thickness tolerance T3valid for all custom and standard widths, carbonsteel, stainless high-graded steel and brass | Thickness
mm | 0,005 | 0,01 to 0,03 | 0,04 to 0,06 | 0,07 to 0,12 | 0,15 and 0,18 | 0,20 and 0,22 | 0,25 and 0,30 | 0,35 | 0,40 and 0,45 | 0,50 and 0,60 | 0,70 | 0,80 to 1,00 | 1,10 to 1,50 | 1,60 to 2,00 | Thickness-
tolerance
mm | ±0,001 | ±0,002 | ±0,003 | ±0,004 | ±0,005 | ±0,006 | ±0,007 | ±0,008 | ±0,009 | ±0,010 | ±0,012 | ±0,013 | ±0,020 | ±0,035 |
|
|
